Quiz Summary

0 of 8 Questions completed

Questions:

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 8 Questions answered correctly

Your time:

You have reached 0 of 0 point(s), (0)

Current
Review
Answered
Correct
Incorrect

Match the body types to the type of load.

Drag the correct answer into the box.

Sort elements

Tanker
Tipper
Pantech or curtainsider
Fridge of Freezer vans or trailers
Drop Deck, Deck widener or low loader
Skel trailer

Liquids and fine powders where the product needs to be completely enclosed

Load is blocked in a horizontal directions but can be loaded into the top of the vehicle

General freight
Frozen or refrigerated goods
Heavy, high or wide loads
Loaded containers

Question 2 of 8

2. Question
Fill in the blanks.
- When using a headboard the first step is to check to see if it is . If not it cannot be relied on to restrain the load unless it is in the same way as a pipe gate or Barrier using a chain or other supplementary restraint.
Correct

Incorrect
Question 3 of 8

3. Question
Fill in the blanks.
- Side gates and curtains are often used to provide sideways restraint for loads but can only be relied on as part of a restraint system if they are rated or they have been reinforced using lashings. Side gate ratings will typically specify the load type and will define the capacity in terms of allowable weight per pallet space or pallet width or payload for an evenly distributed weight.
Correct

Incorrect
Question 4 of 8

4. Question
Fill in the blank.
- Chocks cradles and A Frames are often used for complex loads and are often used in engineered systems designed for specific complex loads. They are often used to assist in restraining loads that are prone to .
Correct

Incorrect
Question 5 of 8

5. Question
Fill in the blank.
- It is critical that Webbing or chains used in restraining loads are regularly to ensure that they are in good condition. It is important to know the of the webbing or chain to understand its capacity.
Correct

Incorrect
Question 6 of 8

6. Question
Which of the following statements are true:
- The rating of the lashing is equal to the load it can restrain
- Webbing that has knots in it should not be used
- Correct pretensioning of lashings is critical to their performance
- Webbing needs to be protected from sharp edges and rough and high friction surfaces
- Webbing stretches less than chain
- Knots can be used to attach chains to anchor points
Correct

Incorrect
Question 7 of 8

7. Question
Dunnage, Rubber Matts, interlayer packaging and Tyres can be important parts of a load restraint system.

Which of the following statements are true?
- Dunnage is typically round in shape
- Dunnage is typically made of steel
- Dunnage may be used to raise a load to increase the lashing angle
- Dunnage may be used to increase friction between the load and the deck
- Dunnage used between layers should be aligned with the lashing positions
- Rubber load mats are used to lower the friction cooeficient between the load and the truck
- Rubber tyres can be used in place of dunnage or rubber mats for some loads
Correct

Incorrect
Question 8 of 8

8. Question
Lashings are not capable of providing the correct force to the load unless they are able to be attached to suitable anchor points on the vehicle.

Which of the following statements are correct:
- Lashings need to be attached close to supports on tie rails if they are subject to high loads to avoid bending the rail
- When using chain it is important that end fittings do not come into contact with the coming rail or other parts of the vehicle that could damage them
- Ratings for hooks need to match the capacity of the chain
Correct

Incorrect